Long Bar and Structural Material

Our bar and structural team can process material in a variety of ways to meet your needs including:
  • Sawing up to 18"x24" rectangle or 20" round
  • Miter sawing from 90° to 40°
  • Hole punching up to 2" diameter in various shapes
  • Cutting, beveling, and tapping round and rectangular tubes, beams, channels, and angles up to 6" in diameter with our newest laser:

Size Catalogs:

Flat Bar

  • Hot roll, cold roll, stainless, and aluminum flat bar in thicknesses from 1/8" up to 2" and widths from 1/2" to 14".

Angle

  • Hot roll, stainless, and aluminum angles with thicknesses from 1/8" (or 1/16" for aluminum) up to 5/8" and legs from 1/2" to 8".

Channel

  • Junior, ship, and structural steel channels from 1" wide up to 15" wide and wider with several different weights per foot.
  • Structural and architectural channels from 3/4" wide up to 12".

Pipe

  • Painted and bare steel pipe from 1/8" schedule 40 up to 20" extra strong.
  • Aluminum pipe from 1/4" to upwards of 8".
  • Stainless steel pipe from 1/8" up to 6".

Rebar

  • 20' sticks of rebar from #3 (3/8") up to #8 (1").

Rectangular Tube

  • Steel rectangular tube from 1/2" x 1/2" with .065" walls to upwards of 12" x 12" with .625" walls.
  • Aluminum rectangular tube 1/2" x 1/2" with .063" and up with square and rounded corners.
  • Stainless steel rectangular tube 3/4" x 3/4" x .065" and up.

Round Bar

  • Hot roll round bar from 1/4" up to 8".
  • Cold roll and chrome round bar (including heat treated, turned ground and polished, and metric bars) grades C1018, 12L14, A4140, SP/1144, C1045, and others from 1/8" to upwards of 6".
  • Aluminum round bar from 3/16" to upwards of 9".
  • Stainless steel round bar from 1/8" to upwards of 3".

Round Tube

  • Hot and cold roll electric weld and spout tube from 1/2" OD up to 12" with wall thicknesses between .065" and .313".
  • Seamless round tube from 1/2" OD to upwards of 14" with wall thicknesses from .065" up to 2".
  • Aluminum round tube from 1/2" OD to 8" with wall thicknesses from .035" up to .250".
  • Stainless steel round tube from 5/16" OD to upwards of 4" with wall thicknesses from .028" up to .750".

Square Bar

  • Hot roll square bar from 3/8" up to 2".
  • Cold roll square bar from 1/8" up to 4".
  • Aluminum square bar from 1/4" up to 5".
  • Stainless steel square bar from 1/8" up to 2".